Technology Toolbox

Your technology Sherpa for the Microsoft platform

Jeremy Jameson - Founder and Principal



A Better Way to Build SharePoint Solution Packages (and CAB Files)

This post originally appeared on my MSDN blog:

Since I no longer work for Microsoft, I have copied it here in case that blog ever goes away.

Up until about an hour ago, I'd been using post-build events on my Visual Studio projects to create SharePoint solution packages (WSPs). However, while this worked reasonably well, this method always bothered me a little because the post-build events run every time you build, regardless of whether the underlying files have changed or not. In other words, using post-build events is just a "brute force" method that builds the CAB (i.e. WSP) file with no dependency checking whatsoever.

Here is a sample of a post-build event used to create a SharePoint solution package:

@echo Creating SharePoint solution package...
makecab /F "$(ProjectDir)DeploymentFiles\ProductionDeployment\wsp_structure.ddf"

Converting this simple "makecab" command to an MSBuild target is easy -- just use an Exec task:

<Target Name="CreateSharePointSolutionPackage">
  <Message Text='Creating SharePoint solution package...' />
  <Exec Command='makecab /F "$(ProjectDir)DeploymentFiles\ProductionDeployment\wsp_structure.ddf"'
    WorkingDirectory='$(OutDir)' />

The only hiccup that tripped me up a little is the fact that I had to set the WorkingDirectory attribute to avoid having to make any changes to the paths specified in the DDF file (since they were previously specified using relative paths compatible with running makecab.exe in the post-build event). Also, getting it to work without the WorkingDirectory attribute would have changed the location of the generated CAB -- er, I mean WSP -- file, which is not what I wanted anyway.

At this point, however, note that I haven't really improved the situation at all (i.e. the CAB/WSP file is created each time you build). To achieve the desired goal (i.e. building the CAB/WSP file only when necessary), you need to specify Inputs and Outputs on the Target. I then tested the following to verify that I was on the right track:

<Target Name="CreateSharePointSolutionPackage"
  <Message Text='Creating SharePoint solution package...' />
  <Exec Command='makecab /F "$(ProjectDir)DeploymentFiles\ProductionDeployment\wsp_structure.ddf"'
    WorkingDirectory='$(OutDir)' />

This worked (meaning, pressing Ctrl+Shift+B repeatedly resulted in essentially no work for Visual Studio) but obviously it only checks for an updated DDF file when deciding whether or not to build the target -- which is fundamentally incorrect since the DDF may specify essentially any file in the project to include in the solution package.

What I really wanted to specify in the Inputs attribute is all of the items in the project, since any of them may be included in the DDF and consequently in the SharePoint solution package. In other words, I wanted to specify all of the following:

  <Reference Include="...">
  <Compile Include="...">
  <None Include="...">
  <Content Include="...">
  <ProjectReference Include="...">

Cliff Hudson, an SDE on the Visual Studio Platform team, was kind enough to point me in the right direction. [Thanks for the tip, Cliff.]

Update (2008-04-14)

When I originally wrote this blog post last Friday, I specified the following:


However, early this morning I discovered that there are a couple of rare scenarios where the WSP/CAB file is not rebuilt when specifying those inputs -- even though the actual assembly is recompiled.

The first scenario is due to project references. If you dive deep into Microsoft.Common.targets, you'll find targets like SplitProjectReferencesByType, ResolveProjectReferences, ResolveVCProjectReferences, and ResolveReferences. These handle the "expansion" of the project references to determine the actual list of dependent files corresponding to the project references. Not expanding the project references in the list of inputs for CreateSharePointSolutionPackage is usually benign, unless the referenced assembly is actually deployed within the "referencing" project. For example, if ProjectA actually builds the WSP/CAB file, but also includes the assembly from ProjectB, then a minor change in ProjectB would first rebuild ProjectB, and then ProjectA, but would not rebuild the corresponding WSP/CAB file.

The second scenario that I discovered is when your project specifies embedded resources. Unfortunately, the project that I started with last Friday did not include embedded resources and consequently I did not notice that additional item group until this morning when I was hunting around in Microsoft.Common.targets.

The updated inputs below ensure that the WSP/CAB is built whenever the project assembly is built, by replacing @(ProjectReference) with $(OutDir)$(TargetFileName) -- which also made @(Compile) superfluous. In other words, it handles scenarios where the only change is to an embedded resource or when a dependent assembly specified using a project reference is updated.

Here is the updated MSBuild target with the correct inputs specified:

<Target Name="CreateSharePointSolutionPackage"
  <Message Text='Creating SharePoint solution package...' />
  <Exec Command='makecab /F "$(ProjectDir)DeploymentFiles\ProductionDeployment\wsp_structure.ddf"'
    WorkingDirectory='$(OutDir)' />

Replacing the post-build event with this target in the project file achieves the desired goal of creating or updating the SharePoint solution only when necessary (i.e. when one or more of the files comprising the CAB/WSP is updated).

The final piece is to "wire in" the custom target. There are a couple of ways to do this:

  1. Append CreateSharePointSolutionPackage to the DefaultTargets attribute for the project, or
  2. Add it as a dependency of the default Build target, using the technique described by Neil Enns (a.k.a. "Demo Boy") on the MSBuild Team blog.

The second option seems a little more elegant than the first, and hence is what I chose to use:


Building SharePoint solution packages by modifying the MSBuild targets certainly isn't a new concept. It has been over a year since I first read Andrew Connell's blog post on this. However, there were a couple of things that bothered me about Andrew's approach; the most important being that I didn't see any compelling reasons to switch from using post-build events. With true dependency checking to avoid superfluous calls to makecab.exe, this is obviously no longer the case.


  1. # SharePoint Kaffeetasse # 57

    April 14, 2008 2:53 PM
  2. # SharePoint 2007 : Features et Solutions, les outils de Création et de Déploiement (partie 3)

    June 16, 2008 7:07 PM
  3. # SharePoint 2007 : Features et Solutions, les outils de Création et de Déploiement (partie 3)

    June 16, 2008 7:10 PM
  4. # Why I'm Not a Fan of WspBuilder

    March 5, 2009 7:08 PM
  5. # Large Visual Studio Solutions and Loading/Unloading Projects

    March 5, 2009 9:15 PM
  6. # Large Visual Studio Solutions and Loading/Unloading Projects

    March 5, 2009 9:16 PM
  7. # Updated Thoughts on WSPBuilder

    March 30, 2009 7:55 PM

Add Comment

Optional, but recommended (especially if you have a Gravatar). Note that your email address will not appear with your comment.
If URL is specified, it will be included as a link with your name.

To prevent spam from being submitted, please select the following fruit: Grapes

Please add 2 and 4 and type the answer here: